Vis Motorsport HPFP - 2.0 TFSI EA113

Vis Motorsport HPFP - 2.0 TFSI EA113

  • £350.00
    Unit price per 
Tax included. Shipping calculated at checkout.



**This is a must for all Stage 2+ tunes

Modification of the 2.0T FSI EA113 engines far beyond OEM power levels requires an additional volume of high-pressure fuel in order to avoid "fuel cuts" especially in the midrange

In many cases we see the factory fuel pump begin to suffer from pressure loss.
The limitation of how much volume of fuel the high pressure pump can flow is dependent upon the volume displaced by the pressurizing cylinder inside the pump.
This upgrade replaces the internal parts that are responsible for pressure and volume of fuel that reaches your injectors to meet the demands that come for higher power.

Tolerances involved, the final surface finish on the piston inside the fuel pump is so critical that it can be damaged by touching them with bare hands.
The tolerances between the piston and the new sleeve the piston rides in can only be measured by a machine which uses air volumes to measure the part clearances to within microscopic levels.

CMM coordinate measuring machine is a device for measuring the physical geometrical characteristics of an object and used here with success.

•       In order to address this lack of fuel ,and power outputs never stop increasing VIS Motorsport developed 2 progressively stronger HPFP upgrade kits stages to suits everybody's build needs and the first company who designed and implement a working bigger stage/size and the only one available to customers around the world with 2 stages!
• stage 1 -  175bar  - 55% more piston area for 250-600hp
• LIGHTER THAN OEM
•       Piston head is optimized for ideal hydrodynamic flow after we have tested over years different versions of design we find the perfect one.
•      The surface is hardened by a process called Nitriding and heat treated in 3 different stages.
•       Nitriding is not a coating, which can chip or flake off like DLC coating - instead, Nitrogen atoms are infused in to the atomic structure of the outer surface in deepth of the material.
•      It uses the OEM-style spring keeper and a redesigned piston tip end for more stability inside retainer, ensures that will not weaken by constant contact with camfollower or wear it,this is the best way allowing the piston inside to rotate even and don't get direct contact to cam follower if any failure of that occur due to bigger stress,protecting it,even saving the internal kit.
• tested at 12.000 rpm on testing bench .
•      Even a standard/stock or Stage 1 car will see benefits from running these internals, not only do you extend the life of the N276 solenoid since it’s not working as hard but you already have an upgraded HPFP giving you more headroom in your fuelling system if you decide to do more modifications further, it can be installed and run on OEM software.
•      Can sustain easy 600 HP and over 175 bar starting from STG 1.
•      It's being tested now for over 5 years on many configurations and different hardware/software setups around the globe and have proven again and again the reliability and performance you can expect from each and every  VIS Motorsport HPFP Upgrade kit
•     It comes with fully detailed instructions including step by step fitting images including all necessary components and a detailed install sheet to get the job done.


o  175bar hpfp kit
o  Piston has over than 55% / 75% area than OEM
o  Piston head optimized for ideal fuel flow direction
o  Piston surface hardened and heat treated in 3 different stages
o  Uses OEM-style spring keeper, not a higher rated one that will prematurely wear the camfollower
o  Get the most out of the direct injection fuelling system on your 2.0T FSI. Not only does the upgrade increase the amount of fuel your high pressure fuel pump can deliver but it will also decrease the duty cycle of the N276 solenoid on your pump. Lowering the duty cycle of the N276 will extend the life of this solenoid, an item that commonly fails on these pumps but isn't available separately.
o  Even a standard stock or Stage 1 car will see benefits from running these internals
o  Can sustain easy 600 hp, over 175 bar if hardware setup allow!
o  Laser marked for better traceability and protecting from fake replica
o Pump housing O ring made of viton
o Each HPFP internal kit is sold as a rebuild kit only(not complete unit),but you send us your pump. We’ll inspect it, rebuild it, test it, and ship it back if you are not able to install! Either you can choose from our new complete units.

Fits all 2.0TFSI EA113/1.4/3.2/3.6/4.2/5.2 engine based cars.
Most popular :
o Audi A1
o Audi A3 / 2.0 TFSI/S3 8P
o Audi A4 B7 2.0 TFSI/DTM EDITION/4.2 FSI RS4
o Audi R8 4.2 FSI
o Audi S5 B8 4.2 FSI
o Audi TT / TTS 8J
o Seat Leon FR / CUPRA/COPA
o VW Golf 5 GTI / Edition30/Pirelli Edition/Fahrenheit
o VW Golf 6 R20 / Edition 35
o VW Scirocco R / 2.0TFSI
o VW EOS 2.0 TFSI
o VW JETTA 2.0 TFSI
o VW Passat R36
o Mazda Mazdaspeed 3 2007-2013 / Mazdaspeed 6 2006-2007